Gold Sales
  • Media Center


    2019-01-03 13:17:48

    A planetary gear reducer is a power transmission mechanism that uses a gear's speed converter to decelerate the number of revolutions of the motor to the desired number of revolutions, and to obtain a device with a large torque, which leads to easy wear and tear. The period of gear tooth gear deceleration is maintained. Here we look:

    1. Reasonable selection of lubricating oil, especially hard-tooth cylindrical gear reducer with input power greater than 11 KW, must be filled with medium-load gear oil. CAUTION Always check the oil, hydraulic oil, coolant, oil level and quality, and check the tightness of the machine. The lack of excess oil in the inspection should be analyzed. At the same time, the lubrication of each lubrication point should be strengthened. It is recommended that lubrication points be greased weekly (except for special requirements) during the running-in period. When the speed reducer with oil pump is connected to the power supply, pay attention to the rotation direction of the oil pump and rotate clockwise to correct.

    2. Keep the planetary gear reducer clean and timely adjust and tighten the loose parts to prevent the components from wearing out or losing parts due to loosening.

    3. After the run-in period of the planetary gear reducer is over, the machine shall be subject to compulsory maintenance, check and adjustment work, and attention shall be paid to the replacement of the oil.

    4, non-standard reducer, the operator should accept the manufacturer's training, guidance, to its full understanding of the structure, performance, and access to a certain degree of operation and maintenance experience can operate non-standard reducer.

    5. Pay attention to the work load during the run-in period. The work load during the run-in period should not exceed 85% of the rated work load, and an appropriate workload should be arranged to prevent the overheating caused by the continuous operation of the reducer.

    6, pay attention to regular observation, there is an exception, should be promptly removed to be excluded, in the cause was not found, the failure was not ruled out before the operation should be stopped.

    After knowing how to maintain the running-in period of the planetary gear reducer, we believe that it will provide us with more help in the future use, and thus it will be more beneficial to our use and extend its service life.

  • TEL 0086-576-86888862
  • FAX 0086-576-86888862